Cakes & Desserts & Liqueurs
Drawing of the week book
How to turn hundreds of whiteboard drawings in a great looking book.
How to build your own great looking lamp with wood and easy to get materials.
VouwGrond - Paper craft soil layer visualization
Soil types at almost any location in the Netherlands using paper craft!
MySensors based sensors + dashboards
Introduction to MySensors library & battery powered nodes.
Simple DIY wireless button
How to make a BIG wireless button to trigger anything on your computer, laptop or Rasberry Pi.
DIY dressoir using wood
Candle powered Christmas pyramid
Building a Christmas pyramid (Weihnachtspyramide) with wood.
Construction of a Gloggomobil
DIY Tetrapod plush
Climagon climate paper craft
Internet hardware furniture
Serious games at Deltares
Pompeii - Bike pump controlled game
Om de put (Around the pit)
Serious game about levee patrolling! This will learn you how to recognize potential levee failures...
CPT - game
Sustainable Delta Game
Game which combines 3d graphics, playing cards and a simulation model.
Flood Risk Management Game created for a game design course. (In both Dutch and English)
Max in Muziekland
NLGD Contest game created in Flash for children in hospitals.
Augmented Reality / Graphics
Subsoil on a mobile device
My Master thesis: Visualizing and estimating the distance and depth of underground infrastructure.
Real-time visualization of water simulation
Turning calculated water flows into a real-time visualization.
RED - Motion captured animation
Open Data Sources for 3D Data Visualisation
Hiding your internet hardware
Making your internet gear, disappear!
I really wanted to solve the problem of having a lot of network cables, switches, routers, adapters all on the floor. Therefore I created a small enclosement for these devices myself. The result worked out really well in my opinion!
Notice: This page still needs some work. I have decided to upload it anyway, as clever people can build this already by looking at the photos .
Three important criteria what I wanted to meet:
- »It should still be possible to work easily with cables, yet make them not as visible as they normally are.
- »It should not be completely closed, as the equipment will get a bit warm
- »Building it should be straightforward!
The first concept was created in 3DStudio Max, which is a 3D modelling application which I normally work with to create game mode. The colored boxes are bounding box versions of the equipment that needs to be placed inside.
To build it, you need the following:
- »Construction glue for wood
- »A saw and a mitre box for making 45 degree cuts
- »Wooden strips. [specify sizes]
You can start making rectangular strips for the amount that you need. I used square shaped wooden strips in the corners, these hold the rectangular strips together. The top lid is also a normal rectangular strip, except that the covering strips are aligned flat instead of vertical. The picture speak for themselves. The bottom only contains a few of these strips. It is important to use good glue, as it holds everything literally together!
The end result is a great enclosement which contains your internet hardware!